CLUTCH MOTOR

1.The motor is specially designed for powerful performance in industrial sewing machines
2.Vibration and noise are minimized.
3.The temperature rise of the motor is extremely low.
4.The size and weight of the flywheel eliminate speed reduction when engaging the clutch. Heavy-duty lining material prevents any slipping. Therefore the accurate clutch operation permits instant starting and stopping of the sewing machine.
5.The operating lever can always be kept in line with the pitman rod and foot treadle.
6.The motor is provided with a belt tightener of American dimensions. The tension of the belt is easily adjusted by simply loosening the adjustment nut.

 

Specification
Specification
Phase Pole Output Volt Hertz Speed N.W./G.W. Measurement
Single
or
Three
Phase		 2
or
4		 (1/4HP)200W 1¢F
100-127V
200-240V
100-127 /200-240V
3¢F
200-240V
380-440V
200-240 /380-440V		 50/60 HZ 2 Poles
2850/3450
r.p.m.
4 Poles
1425/1725
r.p.m.		 17.5/18.5kgs 17"x12"x10"
(1/3HP)250W 18.0/19.0kgs
(1/2HP)400W 21-23/22-24kgs
(3/4HP)560W 25/26kgs 18"x12"x10
(1HP)750W 27/28kgs
(1.5HP)1200W 37/38kgs 20"x13"x11"
Shaft Diameter and Pulley Size
Shaft Diameter Pulley Size (Outside Diameter)
15mm Straight 65,70,75,80,90,95,100,105,110,120,140
3/4 AMCO Straight 2 3/8", 2 6/8", 3 1/8", 3 5/8", 4", 5"
Din Taper 65,75,80,90,100,105,110,120,140
Optional Components
Belt Tightener Shaft Shaft Light Tapping Wire Connection Switch
USA Type * 15mm * Without 　 Without * Reversing
Plug		 * Without 　
Din Type 　 3/4" 　 P/No.77 * 6V 　 Push Button
Switch		 *
　 　 Din Type 　 P/No.76   12V   Terminal
Block		 　 Safety
Switch		 　
P/No.79   Receptacle  

The item marked * is regular equipment.
Safety Requirement
Safety Belt Tightener Belt Guard Light Tapping Wire Connection Switch
CSA USA Type P/No.76 6V Receptacle Terminal Block None
CE DIN Type P/No.79 None Terminal Block None
Model Code

     
Note: When ordering, please specify the model code, specification, option components,pulley size and safety requirement.
Dimension